Saturday, November 15, 2014

Met the MECGC at the Metz!

Brit twins, and others...
With the boys either not allowed to ride today, or hungover, I cruised down to Canungra for Breakfast on my tod. Saw a few familiar faces, ordered the usual bacon and egg roll and obligatory flat white, and settled down to read Classic Bike. Once consumed, I was ready to head off and take in the views before it got too hot (they're expecting 41°C today, oof).

Strolling into the car park and someone's trying to negotiate a Norton twin into the spot next to the Gixer; and there's me wearing a Norton T-shirt, carrying Classic Bike. Got chatting about Brit twins etc., and found out it was a club ride for the Gold Coast's Motorcycle Enthusiast's Club. Met a few others, some on modern bikes, and took a few pics. It's days like these I wish the Beesa was here. 



Monday, November 10, 2014

Biketech7 - GSXR1000 Fuel Pumps And Filters.

Progress is made...
With the genuine fuel filter, and other bits, quickly delivered from International Moto Parts, and the aftermarket pump from Axiom Performance, I was ready to get back some of the lost power.
So, tank up and fuel line disconnected, I thought I'd try another fuel flow test. No fuel runs out of the tank at all when I disconnect the pipe - which isn't right, it should flow out under gravity. This time, instead of connecting up a separate loom to the pump wiring, I'm just going to turn the ignition on and let the bike run its own priming cycle. That way I can compare fuel amounts before the work, and after. 


Wednesday, November 5, 2014

GSX750ES - It Continues To Evolve.

The Fabrication.
It's just as well I took this on as a long-termer because due to money, time, and willpower, it's taking ages. 
Cutting, folding, bending and welding metal is something I've dabbled with over the years, but not something I'd consider myself an expert on. Every time I make something I'm not really happy with, I question my ability. But if you stop at that point...


“Our greatest glory is not in never failing, but in rising up every time we fail.” 
― Ralph Waldo Emerson

And so we battle on.
Determined to do the metalwork myself, Im learning as much as I can along the way. I want an English wheel, but that'll have to wait. I want to make the petrol tank, but maybe on another bike. The seat/tail unit is the part I need to get sorted first - for my own sanity.
Compound curves for me at this point are nigh on impossible. It's going to be a while before I can even hope to get where I need to be, so basic curves are the go for now. The welding isn't brilliant either, but I'm learning more all the time. I bought a cheap LED tail light off eBay, and this weekend I made a few more bits to hold it in place.

This is the tail unit I began to make months ago. I make everything in cardboard, get it how I want and then mark it out on a sheet of ally. If it doesn't bend easily I warm it up with a blow lamp using the "soap-turns-black" method. Once annealed I bend it over my leg or something with a smooth curve, taking care not to kink it. This pic also shows one of the first mock-ups of the chain guard. 



Thursday, October 23, 2014

GSXR1000K6 - Fuel Pressure And Flow Problems.

Modern thou's are a bit quick...
Even when they have fuelling issues. Ride this thing on the road and any problems are barely perceptible, but once on the track there's a gaping hole where power should be chiming in - and it's gutting! 

So I did a bit of investigating.
Ok, we start with an in-tank fuel filter/pump assembly. It consists of a gauze at the bottom of the unit to prevent any dirt entering the pump. The pump then forces fuel through another larger filter assembly, and the built-in regulator allows any excess pressure to vent fuel back into the tank. 
This complete unit supplies fuel, at 43psi, to a rail containing eight injectors - four primary and four secondary. The primaries maintain the low end of the engine's needs, with the secondaries starting to open at around 4,500RPM and their duration (time spent open) is controlled depending on the angle of the TPS (Throttle Position Sensor). Sounds easy enough so far.

Then there's the exhaust valve. With the standard can still fitted, I'm still relying on the actuator to open and close the butterfly valve in the pipe. A quick look through the frame at the actuator/motor, when switching the ignition on, and it's obvious it isn't moving through its complete cycle. Another problem?


Thursday, October 16, 2014

Starter Motor Issues?

Slow to turn over? Doesn't even attempt?
The little GSX saga continued when I wanted to turn it over on the starter motor just to see if everything was doing what it should.
I knew the cams were turning when I turned the crank with a spanner, but there's nothing like spinning it over on the starter to listen to any clonks, or other death blows.
With a charged battery at the ready, I used a pair of jump leads to try and get it to spin, but nothing, just sparks. It's worth noting that you don't want to hold the leads on for too long, in the hope it'll start to turn. Just flick the lead quickly to earth on the frame, or engine, and see if it begins to spin. 



Monday, October 13, 2014

An Ability To See The Best In Everything - Exuding Positivity.

Taking the risks.
It's fair to say I've taken a lot of chances on eBay, and I love it. Whacking a bid on, finding out you've won and seeing how good it turns out. Great fun.
A good mate of mine never did so well; everything he seemed to buy would turn into a massive dilemma. I remember him receiving a box of RMX250 bits years ago and, subsequently, chucking it all, part by part, into the bin at work. How we laughed; no hang on, that was just me. Well now Harvey, time to get your own back.

Putting it down to experience.
The GSX750 I should be working on was a rough-as-f@#k pig when I first got it, but if you look at projects like that, you'd never get on with them. So I try to look at the best bits and work from there. Dig deep and crack on.

So...
Today I bought a "parts bike" with an engine that "turns over", and I've been digging deep ever since!

Good bits - it's a Suzuki.

Bad bits - too many to mention.

Redeeming features - the guy selling it had wads of other parts, including straight forks to fit the GSX750. Every cloud, my friend, every cloud.



Saturday, October 11, 2014

Lakeside Track Days, And The Ability To Learn... From Mistakes.

Tyres & Temperatures.
Nowadays, I don't think many riders would dispute the importance of warming a tyre before hard use. Thirty years ago you'd just be glad to see a bit of tread around the entire circumference, you didn't expect them to stick to the road as well - but hell, it was always a nice bonus when they did!
So fast forward, and what do we have? Pretty cool tech that is positively bursting from the race scene. The bike manufacturers now make bikes that are almost impeccable, delivering huge amounts of linear power, quietly, through a frame and swingarm strong enough to hold a tank together... and they are very, very hard to improve on. Where once you chose a JMC swingarm, or Harris frame, for better handling, now you just keep it standard and wonder how you ever managed on the steel cradle, flexi-frames of yesteryear. 
On top of that, the rubber things that transmit everything to the road, or you, are designed with the actual bike in mind, not just a rubber ring forged in the dimensions to suit your wheels. 

And these tyres let you get away with murder...