Saturday, March 8, 2014

2013 KTM 50SX - Clutch Replacement.

Clutch slipping, loss of drive but, more importantly, no race wins!
Moving on from the centrifugal, three shoe clutch of the previous mini KTM's, they now have an adjustable, multi-plate assembly fitted. Let's have a look inside.


Monday, March 3, 2014

GSX750 - Cleaning the Carbs, Carbies or Carburettors.

Call 'em what you will...
But this is the thing, the 6Sigma jet kit was ready to be fitted; the carbs were looking a little worse for wear; they needed a damn good clean; and I bought a damn cheap ultrasonic cleaner.

That last point, and my grammar, was a problem...
Now the bike ran ok - ok it didn't idle properly (but then it was in a pretty bad state), but it gave me enough of an inkling that most of it was pretty good inside. And that's half the battle. If you have a non-runner, "do it up" and find something's not right afterwards, it can be hard to pinpoint the problem. At least now when it all goes tits up, I'll know it's probably something to do with a part I've stripped - like the carbs.

Initially, they looked like this.
Dirty on the outside and, due to an air filter that was long overdue for replacement, not too good inside either. So onto eBay for an ultrasonic cleaner.