Showing posts with label GSX750 Cafe Racer. Show all posts
Showing posts with label GSX750 Cafe Racer. Show all posts

Wednesday, June 17, 2015

Fabrication - I take my hat off...

To people who can bash metal.
While I'm trying to make a new seat base (lost interest in the first one) to match up with the tank and tail unit, I decided to try and get the side panels in place so I knew what I was working with.
Over-thinking one aspect while knocking out another is slowing me down, but it's a learning curve I have to travel. Hey, Rome wasn't built in a day.

So, I'd already cut out panels from 3mm aluminium to fit in the side of the bike. They were a good fit and stayed in place with masking tape, but that's no good for the finished bike. I needed a method of holding them in place, and also to blend them into the top of the frame. I cut out some more pieces to hang over the frame, on rubber mounts, and set about attaching them to the side panels.

Here's a pic of the basic righthand panel. Both sides started like this, being bent to suit the angles of the frame and fitting flush.



Thursday, June 28, 2012

Suzuki GSX750 ESD Stripdown.

I'd owned it a week, time to get it apart.
Stroll on, this bike has had a hard life! The forks are bent and pitted, the rear suspension hasn't seen grease since it left the Suzuki factory, and the swingarm pivot (16mm thick!) was actually sheared off. 

But that's enough about the good points!

Time to get the camera out and start ripping it to bits.