Results spur you on

This is what restoration is all about.  Taking something that looks fit for the bin and bringing it back to life. The clutch cover.

A quick wire brush, a rub with some wet and dry and I reckon it'll be ready.  Nearly.

Oil pump drive removed along with the clutch actuating mechanism.  The inside of the cover is in superb condition!  The outside not so.  Time for the Dremel fitted with a tiny wire brush.

The Dremel did the business - now for the paint.  This time I armed myself with paint stripper.  

Fantastic stuff!  Just need a scraper (plastic filler spreader is ideal because it won't scratch the metal) and we're away.  Better to wear gloves when doing this because that stuff stings a bit!

Time for the 120 grit wet and dry and a wash in the sink while no-one's about... 'looks around nervously'.

Time to get back in the garage before I get found out.

It's a good idea to clean out all of the threads.  Corrosion, instant gasket (silicone) and damaged threads all cause havoc when rebuilding so sort it out as you go along.  A good tap and die set is a must when restoring.

Right, let's give it a whirl.

That'll ding dang do for me.  Just needs the paint rubbing off the letters and it'll be right.

Not too bad to be fair.  Time to make a start on the stator cover.

Seat Covers, Bases, Rust and Ruin.

I ordered a new seat cover off Ebay because I just happened across it ,and thought I'd better snap it up (that's me all over!). I'm certainly nowhere near that stage yet but at the end of the day - it doesn't matter what you do first.

But maybe I should have had a better look at the seat before splashing out on a new cover!

 

 

Time to get the old cover off and check that seat base.  Looking a little corroded!

 

The staples are very rusty but, with gentle leverage, came out of the plastic strips that are rivetted to the seat base.  Any sharp bits left were taken out with a long-nosed pliers.

So, as the cover came off, the donkey was able to see the carrot.

 

Unfortunately, the base was worse than I first thought.  Not impossible but it might be better to source another seat rather than try and repair.  I'll have a think about this one.

 

The foam, which I thought was in bad shape, didn't turn out to be too bad.  A good wash and I think it's reusable.  Yes I'm serious.  It's still nice and soft and the rough sections shouldn't show once the seat cover is fitted.  I've seen worse.

Sorry if you thought that there might be a shiny new seat sitting at the end - that's how it goes sometimes.  Half the battle when restoring bikes is maintaining the motivation when the rust crumbles in your hands - oh, and money, money's always a problem!

Spend time thinking about the solution - not the problem.

Restoration project: I have one!

We've got a live one here!
It ain't pretty, and there's a lot of work to do, but what an awesome project if I can pull it off!


From what I can gather, it hasn't been run for the last fifteen odd years, and spent around ten of those sat by a pool, three sat on this fence post, with scarecrow aboard, and the last two lying on the ground after it fell off the fence post!

I was in two minds about taking it, but it's a Bombardier Can-am T'n'T 175 and, being as I've owned a few 250's, couldn't miss the chance of taking on another.  Besides, I hate to see anything rotting away.  That's the boot of Doug the dummy and yes, it looked like a dead body!

So Angus, the present owner, fetched the Bobcat and lifted her over the fence so we could have a proper look and I became the proud owner of yet another Bombardier.  For the princely sum of a bottle of Scotch.  Does it get any better than that?

So what can I tell you about it?  This particular bike was made in 1975 by Bombardier.  Known for making planes, trains, snowmobiles etc., their off-road motorcycles were called Can-am's.  This is a T'n'T 175 (short for track and trail).  Powered by a Rotax 2-stroke, disc valve engine with the obvious capacity of 175 cc.

There's a lot missing and a lot that may need to be thrown away.  Is it worth restoring?  Probably not, but restoration shouldn't be about the money - more the enjoyment of problem solving and the pride you get with the finished article.  I wanted to showcase a restoration - showing what could be achieved and, although this could be pushing the boundaries somewhat, will try to do a good job.  Wish me luck.

We lay it in the back of the Falcon and took it home.  Dave, who actually found it for me, was a legend!  We unloaded and quick as a flash he was there, hosing the bike down, then trying to get the seat and tank back on.  He was as excited as I was to see what it would look like.  Even Gaby said she liked it but I'm not sure I believe her as yet.

This is Queensland, Australia and the wildlife wasn't too impressed with the move! Huge spiders living aboard suddenly decided to hop off and make tracks but the ants nest in the front drum still seems to be going strong!

All in all a great weekend and I got what I wanted.  Hopefully Angus is as pleased with the Scotch as I am with the bike.

The clean-up operation will commence soon!  (I promise.)