The Easter break gave me a chance to not only procrastinate some more, but actually get a bit done on the GSX. I decided to fill the front brake lines with a beautiful blue DOT3 fluid, just so I could check for leaks and feel at the lever. The Chinese reservoir was duly fitted, and ten seconds later developed a leak from the sight glass. Tossers!
It came off pretty bloody quickly as my freshly painted headlight switch sat underneath it. So a plastic reservoir was put on loosely while I bled them. The anti-dive units haven't held fluid for years so I was expecting problems, but the only issue was a slight leak around the banjo bolts. With a bit more tension applied to the bolts, all seems good. The lever is a bit on the soft side, but should improve once the pads have bedded in.
Oil be fooked!
Next job was to put a new oil filter in, fill with oil and crank it on the starter to see if the oil light would go out. As previously mentioned, the wire to the oil pressure switch was 'missing' - which could spell trouble. The 'oil light' for today being my test-light mounted between the switch and the live terminal on the battery. It lit up nicely, but refused to go out once cranking. Bugger!
Could the oil pump have gone dry after all the months of sitting around with no oil? Had somebody removed the wire because the engine is fuckered? Was there more to this conspiracy? Oh joy.
I wasn't taking any chances, the sump was taken off to check the pick-up gauze. The sump itself was full of thick, treacle-like oil and in desperate need of a clean out. Degreaser and brake clean soon had it spotless, but it's a worry that all that was running round the engine. The oil pick-up was holding a tiny amount of carbon, but not enough to stop the oil pump sucking and pumping the brown stuff around. So, with all that cleaned up and blown out, the sump was refitted with a new gasket.