Oil Filters — Part Deux.

Where are we at?
OK, so I've changed the oil twice since doing the original oil and filter change when I first got the bike. For those that remember, the filter fitted had no manufacturer's markings on it and, when I cut it up, found it to be absolute crap. 

I fitted a genuine Honda one, and since then just dropped the oil a couple of times to try and get everything running clean inside again. Today I put another flush in the engine and changed it all again. And this, my very bored friends, is how it went down.

2011 CBR600RR
Really like this bike, the paint, the shape, its agility... it's awesome. But someone decided it was a good idea to hide the oil filler cap behind that black fairing panel. Doesn't make sense that to top up the engine oil, or check the filler cap for tightness (as they do before you enter the racetrack), you have to remove part of the fairing.

Oil Filter Review — The True Cost!

Be afraid!
How do you really know what you're getting when you screw on a new oil filter? That little canister has a big job to do considering it's trying to protect your several thousand dollar engine. 
For those lucky enough to have a cartridge-style filter, most of these questions won't apply. You can see every part of the new filter element, you can eyeball all the components on the engine. You can clean out the housing to your own impeccable tolerances. You fit it into the engine using the original manufacturer's components. Boom, you're done.

But what about the spin-ons?

• Does the material filter out all the nasties? And to what micron?
• Does the anti-drain back valve (rubber washer) really stop the oil flowing back into the sump?
• Does the bypass valve open at the specified pressure for your bike?
• Is the filter element sealed correctly within the canister? Hmm...

The news.

Take a look around the net and read about filter reviews, the good, the bad and the downright ugly. I've been a mechanic for a long time and screwed on thousands of filters. And as long as they screw on, happy days. You get the odd leaker, or bad thread, and that's to be expected with a mass-produced unit.

But it's all fit and forget. You never look inside one, and don't know if it's done its job. In a garage, it's all completed in minutes. You don't look at the oil that comes out, couldn't care less about the old filter and send the vehicle on its way for another 20,000 thousand miles (or less, as the case maybe). And that's the harsh reality. You're relying on the fact that the filter is a quality component.

But when an engine fails, can you prove it was the filters fault?