Replacing Brake Seals on Triumph T150V Lockheed Caliper.

She is heavy, and she ain't my brother...

Ye olde Tridents were heavy. There's no way to sugarcoat it, modern bikes are an absolute joy to move around compared to the bikes of the seventies and eighties. I really feel for the older riders having to sell their old 750's and 1000's due to weight, but completely understand why they have to do it.

But it's not just the struggle onto the centre-stand, or moving it out of the garage. You sort of rely, quite heavily (oof is that a pun?), on the brakes to haul all of that extra weight up. And a fixed, two-piston caliper, on a small solid disc, needs to be in pretty good condition to do the job. 

Well this bike is a 1974 model... and it is now 2022, and this is probably its first seal kit. It's done well! Not that it was leaking or anything. The pads weren't binding on the disc either, in fact, everything was pretty good. But the old seals were pulling the pistons back further than they ought to which, to the rider, means much more lever travel before retardation takes place.

Suzuki GS550E — Steering head bearings.

Wandering Aimlessly...

Since the new Metzelers have been fitted, there has been a slight weave at low speed. I hope it's a steering bearing issue and not a trait of the new boots. Being as it was on the list of to-do's for along time, I ordered a genuine top bearing from Suzuki, as there doesn't seem to be an equivalent generic part number, and the old "32006" taper roller from the local bearing shop for the bottom yoke.

While it was apart, it would be time to clean up and paint various parts on the front end. A month and half later and I'm still waiting on the springs to come from America. Postal service is struggling as they're waiting for flights!

Anyway, back to the clean up. The main things on the list were the yokes/triple clamps, headlamp brackets, indicator brackets, and maybe the speedo surround and headlamp itself.

Improving Your Motorcycle's Brakes... Cheaply.

As the lever fades...
With a few miles, or years, under its belt, most bikes start to feel a little bit lacking when it comes to the feel at the lever. And I, for one, am not keen on riding bikes where the lever almost touches the bars. Now, if money is no option, there are plenty of easy fixes:

• New discs and pads
• Braided brake lines
• Rebuild the calipers with new seals, maybe pistons if damaged
• Brembo adjustable master cylinder 

But this gets expensive, and changing parts could be masking an actual problem — something that could be easily fixed. So what if you could improve your standard brakes where things have deteriorated over time? Well read on...