Showing posts with label Bandit 1200. Show all posts
Showing posts with label Bandit 1200. Show all posts

Monday, January 6, 2020

Suzuki Bandit 1200 — Suspension Upgrades.

The Bandit is pretty damn awesome!
Especially considering, for the last couple of months, the shock absorber has been breathing its last and dumped its oil. Not bad for a 24 year-old bike.
Hustling it along was ok as long as you didn't force it. Maintain pace and keep things smooth and it handled most roads perfectly. But while I've been off for the Christmas break, I figured it was time to sort it all out. With a GSXR1000 K8 shock ready to slot in, it was time to upgrade.



Saturday, November 2, 2019

Mk1 Suzuki Bandit 1200 — Tacho Not Working!

Comfort.
I think I've been cramped up on sports bikes too long, because I absolutely love the comfort of the GSF1200! Just this Sunday, after a bacon and egg roll and flat white at Cafe Metz, I headed up the Goat Track. For those not in the know, it's a cracking little road full of hairpin bends that takes you up to North Tamborine. Great fun, up or down, whatever bike. 
Fifty K's per hour is how fast I was going. Fifty K's! 
I was more mellow than a bong-induced mellow guy from Mellowford, and happy to cruise. Until six or seven bikes flew past me like I was on a pushbike!
I took chase, but gave up when the front got a bit iffy in one of the bends. All good, back to Sunday morning cruising.

So what's this thing like day-to-day?
Honestly, it's blown me away. It's quick when you want it, happy to mooch around at snail's pace, just a cracking allrounder. I'm fixing up little things as I go, and making a list of things I want to do.

One thing that was niggling me since getting this thing running was the rev-counter... it wasn't counting the revs. I had two secondhand CDI units, it didn't work on either. I had continuity from the tacho (black/red), back to the CDI. I had 12v and a good earth at the tacho itself. So the tacho must be faulty? One would assume so. But to assume... 

New Old Stock.
Secondhand rev-counters were going for around $150 on eBay, if you could find them. But then a NOS one came up for $300. 



Monday, September 9, 2019

Suzuki Bandit 1200 — Fuel Gauge Not Reading Correctly?

Rusty Tanks? Sounds like a Blues singer.
And if you leave the rust to spread, the blues is what you'll be singing.

Takes me back to when I was 18 or 19, riding a '58 Triumph Speedtwin. My mate and I were on our way into Hereford, the traffic was backed up a bit from the roundabout and we were busy swerving our way through when he came alongside me, on his Stan Stephen's Stage-3 tuned, RD350 YPVS, to tell me that I had a water leak.

My initial response was "F#ck, where from?"

It dawned pretty quickly that there is no water in a pre-unit Triumph! The tank had split and petrol was absolutely pissing out all over the head and barrels! I killed the engine, which helped a little because the vibration stopped, and calmly pushed (very quickly) it over to the bike shop that used to be on that very roundabout. A mechanic there gave me a tray to put under it, and my mate gave me a lift back home where I borrowed a Transit from work to pick up the old Trumpet. Job's a fish.

But I digress, as usual, because we're now in Bandit country. One of the first things I noticed about the Bandit was the fuel gauge, and it didn't move as Suzuki intended. There was also rust visible in the tank. 
A quick test of the fuel gauge goes as follows: unplug the tank sender unit, rear right of the petrol tank on the Bandit, and insert a wire into both terminals of the loom. This is basically returning 12v to the gauge (or mimicking a full tank). The gauge went to the full position so happy days. Time to pull out the tap and fuel sender.