Yamaha MT-10 First Ride.

Transformers, or bikes in disguise?
I guess I wasn't that impressed, initially, with the photos I'd seen of the new (all-conquering?) Yamaha MT-10. It looked too big, and the headlamp assembly/bikini fairing all seemed a bit out there. Definitely a move away from its simpler, smaller siblings, the MT-09 and MT-07.

So when a good mate of mine brought his brand new (just delivered) bike out for a blast on the weekend, I was surprised how good it looked in the metal, especially in these colours. The first thing that came to mind was Transformers, and if it had turned into Optimus Prime and whacked me in the fizzog I wouldn't have been surprised. Maybe they have a new movie on the way and this bike's the star. Who knows?

It looks evil and savage, but actually pretty cool, just what I needed on today's damp roads... not. 
I've got to hand it to Mike, he buys a lot of bikes, and always asks me if I want to have a ride on them. Usually I'm busy and decline. Today I was busy again, but Suzuki projects could wait. I kitted up quickly and gave him the key to the Gixer.

Lakeside 2/7/2016 — Tyre Warmers and Giant Killers.

GSXR1000 vs GSXR750 (with tyre warmers).
It wouldn't be a trackday if we didn't top up with Wild Bean coffees on the way, so the Coomera BP garage was the first stop. And with one of their bacon and egg toasted sandwiches heartily disposed of, we were ready.
'Twas early morning. The sun was on the rise and catching the moon fast — just like an old GSXR1000 on cold tyres against a newish GSXR750 with warm boots — yep, about a lap in and it's all over. But more on this later.

GS550E Paint — And Now The Lacquer.

2000 Grit Wet & Dry
After a good flatting with soapy water and the old P2000 grit, the paintwork was looking smooth and, well, dull. Taking care on the curves and edges not to rub through the red, you're aiming for paint that is uniform all over without any orange peel. 
The scary part is taking your nice shiny paint finish and ruining it. 
But if it worries you, just run water over the paint and watch how it shines again — that's what the lacquer will do.

Gilbert's Cylinder Head Service — Gold Coast.

Skimming, guides, seats, porting... 
Having had several car cylinder heads overhauled by Paul Gilbert since being in Australia, I knew the service and quality was exceptional. That's no bull, they come back like a new part, and I was pretty amazed — especially for the cost.
So when I needed a couple of shims machined on the GS550, I dropped in to see if he could do them. No problem he says, come back in a couple of hours and they'll be ready to go. 
Once we got talking I realised he did a lot of motorcycle work too, and he showed me some of the heads he was currently working on.

This is one of two Rocket III heads that were being ported, one for a supercharger. He said that although he has a flow bench, the ports are now so big on this 2.3L engine that he's had to use someone else's larger version to check the flow. That's going to be one quick Trumpet!

Fast From The Past — Awesome Place!

While perusing the internet the other day for a Paulo Tarozzi fork brace I, quite luckily, happened across this place — Fast From The Past. 

And I found they are an absolute goldmine for old race bikes, cafe racers etc. because they carry those quality parts that are hard to find. Often you find a shop that only carries certain items for a few bikes, and my GSX often comes up lacking.
But here, a fork brace for the GSX750ES is just one of hundreds of different types available, all at realistic prices. And, once ordered, it was delivered to me in Australia in around a week. Nicely done.

How retro is that box? Love it!

I'm Seeing Red... Monza Red.

Amateur paint jobs.
Because I just wanted the GS550 to look good enough to go back on the road without any fineries and, because I'm too tight to pay the extortionate prices needed to get someone to spray it professionally, I'm doing it with aerosols. 

GS550 - Fitting New Points and Condensers.

Fitting what?
Contact breakers, remember them? It appears that many of the younger mechanics coming through don't really know what points and condensers are. Maybe they don't teach them the basics of ignition systems in college anymore, maybe they take no notice because they've never had to fit any.  Probably the latter.

Maybe I'll start with how they work.

To get a spark to fire across the spark plug's air gap, we need a pretty high voltage (20,000 - 30,000 volts), for which we use a coil. Everyone's familiar with those, but just how do you get a spark out of one?  Without electronic jiggery-pokery CDI and transistorised ignition systems?