Showing posts with label classic bike. Show all posts
Showing posts with label classic bike. Show all posts

Friday, January 27, 2023

Yamaha FZ750 Restoration - Burleigh Powder Coating.

The Frame is Back!

True to their word, less than a fortnight later and I got the call that it was ready to pick up. I was slightly apprehensive due to the fact that the rust was pretty bad, with heavy pitting. When you don't get to see what's left after blasting, it's always a worry. It's not cheap either. 

Would I have been better off with a wire brush in a drill and using aerosols? 😟 That would have taken forever as it's a big, complex frame. And the results are never the same when spraying a frame, overspray always dulling one side etc.

The powder coating on the BSA frame is still superb after thirty years, so I'd pretty much made my choice.

First, a wee recap. She was looking a little worse for wear...



The photos actually make it look far better than it was. Brake fluid had taken paint off in some places, rust had started taking over everywhere else. The centre stand looked like it had been dragged up from the Titanic.

Monday, January 23, 2023

The Yamaha FZ750 Restoration.

Blown away...

Carlsberg don't do projects, but if they did, they'd probably be the best projects in the world. Quite frankly, if a restoration project could be ideal, this one could well be it. Admittedly, the plastics are a bit rough, but mechanically she's proving to be pretty good.

After getting the engine running, the bike was quickly stripped and put into boxes. From here I will take pics, and start on individual components. If I get a bit fed up with doing one thing for too long, I'll move on to something else to break up the monotony. It's easy to get overwhelmed when stuck on a time-consuming part.

Anyone who has pulled old machines apart would be familiar with stripped heads on screws and bolts, especially when some of the bike is as rusty as this one. But, as corroded as every fastener is, everything came apart like it was put together last week! It's been surreal.

I had noticed play in the front wheel during the strip-down and was pretty shocked to find this. 

Tuesday, May 18, 2021

Suzuki GS550E — NOS Seat!

Finally found one 😉

This is just a small post to say that i finally found a brand new seat for the GS550!

A legend in Germany had one for sale on eBay and it arrived recently, looking pretty bloody good too!

I ordered new hinge pins and, after years of having to make aftermarket parts fit, was ecstatic to find it just went on and that was it. No adjustments, no cutting or trimming, it just fitted perfectly, on a forty-year-old bike.

To find a seat pan like that is the holy grail. The trims, the strap. WOW! 😍



So nice, and unusual nowadays, to have the original design on the cover. 


I know it's only a seat, but I've been looking for a good used one for bloody ages. To find a new one blew me away!


And it looks amazing!


And what a difference to the way it rides! 

The comfort from this seat is just unreal compared to what was on here before. I had no idea how much the seat forms part of the suspension before, keeping you isolated from the pounding of the road. It now feels like you could cover massive distances in a day. I'm so impressed with it.

And being that much thicker than the old one, my knees are no longer so bent up either. In all those years of riding, I've only ever had one new seat before and that was on the BSA in the nineties. It'll be much higher on my list of priorities for the old bikes in the future.


More soon...

Saturday, November 28, 2020

Metzeler Tyre Test — Suzuki GS550E

First, a bit of history... hey, life isn't all just fun you know!

When the old GS came to me, that fateful morning in 2012, I knew it was going to change my life. It sat there for a long time, mournfully looking to be put back out there, to race around on the mountain roads, to show what it was really capable of.

But I had a GSXR1000 and a DRZ400 supermoto for the fun stuff. This one would wait. However, it kept looking... and I kept ignoring. 

Until, one day, it was reassembled enough to run under its own steam. The excitement was building. The little GS felt proud, there was potential and we could both see it. She was ready to go out and try the roads for the first time in years. The front tyre, however, was looking a bit lame. So I bought a secondhand Dunlop on eBay that was originally fitted to a Harley, the little GS wasn't happy about that, but it meant we got to ride. The rear Barracuda (the what?) had plenty of tread left so she was good to go. And for years she rode around on those old tyres, the front now being seventeen years old 😱.


Thursday, October 8, 2020

Suzuki GS673 Conversion — The Road Test.

 What'll it do mister?

There are no certainties in this life. All we can do is work with the best we've got, and to the best of our ability. When you work with old vehicles, you are left with a hell of a lot of choices. Replace everything for fear of something breaking down the track, or use experience to decide what will keep going, and maybe rely on a little bit of luck. It's probably fair to say we use all of these methods without a second thought.

It would be nice to change every bearing, gear, thrust washer, bolt, moving part etc., but that generally isn't viable. Instead we check, measure and work out what we can get away with. Lots of parts aren't even available anyway so sometimes we are stuck with far greater tolerances. When there is wear in vehicles, we immediately feel it when we ride or drive them but, as human beings, we automatically adjust to cope with the discrepancies. Some better than others.

Sure it's nice to be on a brand new bike, where everything is perfect, but they also leave me feeling somewhat robbed (not just with the cost of them either:). They let you get away with things, incredible brakes, plush suspension, tyres with more grip than you know what to do with. You may even think you're better than you actually are (oof, perish the thought!). 

But with old stuff you feel everything that is happening, hold the bars too hard through the bends and the weaving starts, fight it and things get worse. But relax and let it work everything out for itself and they usually settle down quite nicely. You feel that you're achieving something, that a living being is out for a blast with you, stirs the soul don't they say? (It does get tiring though...)

So ladies and gentlemen, just once, get on an old bike and be amazed at what they will do if you're just prepared to put in the effort...


Friday, January 15, 2010

How to pick a restoration project.

So you fancy a project? Unsure of the best way to go about it? Or even what sort of bike to try and restore?

The best advice I can give is this - don't buy something with the intention of "doing it up" quickly to make money. That's not a restoration, that's buying and selling.

A proper restoration, not necessarily concourse, can easily turn into a money pit and more often than not, you won't get your money back - not in the short term anyway.

It's not about the money or the time you have to put in, it's the love of it. Taking something that looks fit for scrap and turning it into a useable bike that looks as good as new, if not better. What's more, you'll be learning all the time - this in itself should be enough to keep you going through the months when you've had enough. Believe me, there will be times when you've had enough.

So what bike should you choose?

Something that appeals to you, possibly even something obscure or rare - it's your choice but you have to like it because you'll be spending a lot of time with it. If you can't bear to look at it, you're never going to put the effort in.


Think about what you want to do with it when it's finished. Ride it? Sell it? Look at it?


If you plan to take on that Europe trip you always dreamed about, choose something that is big enough to cope. That BSA Bantam will struggle two-up, with luggage, popping to town let alone thousands of miles through country after country.


If you want to sell it afterwards, look at the prices they go for now and do the maths. Bear in mind you could easily spend a few grand bringing an old bike back to life. If you have to do a full restoration, getting back the money you spend is harder than you think.


If you just want to have a pristine example of something - it doesn't matter what it is. Just enjoy it.


This AJS Model 30 pretty much got back the money it cost to restore including original cost. That's doing as much of the work as possible, ourselves. So think about that. A couple of years spent restoring a bike and just about broke even when selling.

The hours spent can't be counted - it's a hobby and a passion. Nothing else matters.


Monday, January 11, 2010

The Great Split Link Debate. Safe?

Opinions are strong where split links are used in chains.
No problem on small bikes but a rivet link is mandatory on large, powerful, machines. Or is it?

The split link was the staple diet of classic British bikes; never a problem and, in fact, you would sometimes need to add a half link when altering sprocket sizes. But they were relatively low-powered and didn't require a permanent, riveted link. But modern bikes can be pushing out an extra 120 BHP, so you generally expect to see a fixed link in place on its 530 O-ring chain.

So when I bought my GSXR 1000 K6 from a dealer, and spotted the new back tyre and shiny, gold chain, I was happy in the knowledge I wasn't going to have to do anything to it. When I got it home I had a closer look and, to my initial horror, this was fitted! It's a 530 O-ring chain made by SFR, a company I've never heard of, but seems to be doing pretty well.



This was nine months ago. I bought a new DID X-ring chain soon after but still haven't fitted it. I just clean/grease the chain every three/four weeks and adjust it when necessary.
So far so good. It's almost become a contest to see how long it will last - actually I don't want to know - and I will change it, and the sprockets, when I see signs of excessive wear.
I'm not saying it's ok to use a split link on an out and out sports bike - but they may not be as bad you think.